Documentation:EVK1100/Hardware Reference

From AVRFreaks Wiki

Contents 1 Overview 2 Introduction 3 Hardware description 3.1 Peripheral on board 3.2 Expansion capabilities 3.3 Microcontroller's interfaces

[edit] Overview

The EVK1100 is a evaluation kit and development system for the AVR32 UC3A [1] microcontroller from Atmel Corporation. It is equipped with a rich set of memories and peripherals, and will hopefully allow to try out the full potential of the AVR32 devices before making PCB.

[edit] Introduction

• Features
• Hardware Revisions
• Known Issues
• Troubleshooting

[edit] Hardware description

• Block diagram
• Powered through USB port or external 8-20V DC supply

[edit] Peripheral on board

• USB (2.0 mini A-B receptacle)
• Ethernet (External Ethernet Phy 10/100 and RJ45 connector)
• 3 x Clocks
• 1 x Atmel DataFlash (8 MBytes)
• 1 x SDRAM (32 MBytes)
• 2 x USARTs
• 4x20 Blue LCD (PWM adjustable backlight)
• 6 x LEDs
• 3 x Push Buttons
• 1 x Joystick
• 1 x Potentiometer
• 1 x Light sensor
• 1 x Temperature sensor
• 1 x SD/MMC slot
• 1 x SPI free lines
• 1 x TWI free line

[edit] Expansion capabilities

• All GPIOs are accessible on expansion connectors
• A wrapping zone is available to prototype easily your applications.

[edit] Microcontroller's interfaces

• SSC (Serial Synchronous controller)
• EBI (External Memory Interface)
• SPI
• USART
• TWI
• TIMERS
• PWM
• MAC
• GPIO
• JTAG connector
• Nexus connector
• Schematic
• Glossary