Documentation:EVK1100/Hardware Features

From AVRFreaks Wiki

• MCU : 32bits AT32UC3A0512 [1] (QFP144)
  
  • 512 kBytes Flash
  • 64 kBytes RAM
  • up to 60 Mhz operations
  • very low power consumption
  • 5V tolerant I/O
• External oscillators: 12MHz on OSC0, free footprint for OSC1, 32KHz on OSC32.
• 4x20 Blue LCD (PWM adjustable backlight)
• USB (2.0 mini A-B receptacle)
• Ethernet (External Ethernet Phy 10/100 and RJ45 connector)
• Analog to Digital Converters : 8 configurable channels (8/10 bits)
• Ready to use sensors :
  • Light sensor
  • Temperature sensor
  • Potentiometer
• 3 Push Buttons
• 1 Joystick
• 6 LEDs
  • 4 monocolor green LEDs
    
  • 2 bicolor red/green LEDs
• Atmel DataFlash (8 MBytes)
• SDRAM (32 MBytes)
• 2 USARTs
  • 1 RS232 with flow control and modem control
  • 1 RS232 with flow control
• JTAG connector
• Nexus connector
• SD/MMC slot
• 1 SPI free lines
• 1 TWI free line
• Wrapping area (0.1 inch pad)
• Powered through USB port or external 8-20V DC supply
• All GPIOs accessible on expansion headers