Pages

Topic / Topic starter Replies Views Last Post Topic
Normal topic 8 counters 4
2,621

Commented by iw2nzm on Tue. Sep 20, 2011 - 01:18 PM

8 counters Commented by iw2nzm on Tue. Sep 20, 2011 - 01:18 PM
Normal topic How to send 8 pulses of signals using XMEGA128A1? 6
3,462

Commented by DocJC on Mon. Sep 19, 2011 - 04:24 PM

How to send 8 pulses of signals using XMEGA128A1? Commented by DocJC on Mon. Sep 19, 2011 - 04:24 PM
Normal topic ADC measurements in Xmega A series 10
7,083

Commented by frankvh on Mon. Sep 19, 2011 - 04:16 PM

ADC measurements in Xmega A series Commented by frankvh on Mon. Sep 19, 2011 - 04:16 PM
Normal topic How to use EBI to write and read FPGA   9
5,480

Commented by lfmorrison on Mon. Sep 19, 2011 - 01:06 PM

How to use EBI to write and read FPGA  Commented by lfmorrison on Mon. Sep 19, 2011 - 01:06 PM
Normal topic How to connect a monochrome LCD display to Xplain boards ? 5
4,089

Commented by itai_n on Sun. Sep 18, 2011 - 07:52 PM

How to connect a monochrome LCD display to Xplain boards ? Commented by itai_n on Sun. Sep 18, 2011 - 07:52 PM
Normal topic Latching timers to ADC 6
3,167

Commented by MarioRivas on Sun. Sep 18, 2011 - 06:37 PM

Latching timers to ADC Commented by MarioRivas on Sun. Sep 18, 2011 - 06:37 PM
Normal topic Intermittant programming on Xplained board with AVRISP2 14
9,282

Commented by sdame172 on Sun. Sep 18, 2011 - 03:22 PM

Intermittant programming on Xplained board with AVRISP2 Commented by sdame172 on Sun. Sep 18, 2011 - 03:22 PM
Normal topic stdio redirection to USB port - Xmega128A1 / AVR Studio 5   9
5,668

Commented by caarecengi on Fri. Sep 16, 2011 - 09:54 PM

stdio redirection to USB port - Xmega128A1 / AVR Studio 5  Commented by caarecengi on Fri. Sep 16, 2011 - 09:54 PM
Normal topic XMEGA A3 vs. D3 5
5,594

Commented by westfw on Fri. Sep 16, 2011 - 07:18 AM

XMEGA A3 vs. D3 Commented by westfw on Fri. Sep 16, 2011 - 07:18 AM
Normal topic PORT_t undefined - where is this defined? 2
3,101

Commented by caarecengi on Thu. Sep 15, 2011 - 06:52 PM

PORT_t undefined - where is this defined? Commented by caarecengi on Thu. Sep 15, 2011 - 06:52 PM
Normal topic Programming an XMega 4
3,649

Commented by gchapman on Wed. Sep 14, 2011 - 03:03 AM

Programming an XMega Commented by gchapman on Wed. Sep 14, 2011 - 03:03 AM
Normal topic PWM 4
2,683

Commented by TripleAxis on Wed. Sep 14, 2011 - 02:34 AM

PWM Commented by TripleAxis on Wed. Sep 14, 2011 - 02:34 AM
Normal topic Structure Controlling a Port Pin 3
3,107

Commented by clawson on Tue. Sep 13, 2011 - 05:04 PM

Structure Controlling a Port Pin Commented by clawson on Tue. Sep 13, 2011 - 05:04 PM
Normal topic How to configure multi EBI? 2
2,593

Commented by lfmorrison on Tue. Sep 13, 2011 - 01:00 PM

How to configure multi EBI? Commented by lfmorrison on Tue. Sep 13, 2011 - 01:00 PM
Normal topic no delay functions in ASF for xmega?? 3
3,990

Commented by clawson on Mon. Sep 12, 2011 - 03:15 PM

no delay functions in ASF for xmega?? Commented by clawson on Mon. Sep 12, 2011 - 03:15 PM
Normal topic Compatibility between ATmega and ATxmega for OS & Runtim 6
5,958

Commented by clawson on Mon. Sep 12, 2011 - 09:41 AM

Compatibility between ATmega and ATxmega for OS & Runtim Commented by clawson on Mon. Sep 12, 2011 - 09:41 AM
Normal topic Help! XMEGA SPI module Handling problem 7
4,269

Commented by angelu on Sun. Sep 11, 2011 - 03:28 AM

Help! XMEGA SPI module Handling problem Commented by angelu on Sun. Sep 11, 2011 - 03:28 AM
Normal topic 19200 BPS UART does only work at 2 MHz - but not at 32 MHz 9
5,825

Commented by DocJC on Wed. Sep 7, 2011 - 02:00 PM

19200 BPS UART does only work at 2 MHz - but not at 32 MHz Commented by DocJC on Wed. Sep 7, 2011 - 02:00 PM
Normal topic Programming Xmega D3 using STK500 2
3,152

Commented by acelink1 on Wed. Sep 7, 2011 - 03:18 AM

Programming Xmega D3 using STK500 Commented by acelink1 on Wed. Sep 7, 2011 - 03:18 AM
Normal topic Designing with the ADC bugs in mind: am I getting it right? 5
3,099

Commented by pichenettes on Tue. Sep 6, 2011 - 01:05 PM

Designing with the ADC bugs in mind: am I getting it right? Commented by pichenettes on Tue. Sep 6, 2011 - 01:05 PM
Normal topic Using int64_t with XMEGA 6
5,167

Commented by frankvh on Sat. Sep 3, 2011 - 03:37 AM

Using int64_t with XMEGA Commented by frankvh on Sat. Sep 3, 2011 - 03:37 AM
Normal topic xmega clock out to ov7725 6
3,568

Commented by blackson on Thu. Sep 1, 2011 - 10:39 PM

xmega clock out to ov7725 Commented by blackson on Thu. Sep 1, 2011 - 10:39 PM
Normal topic MAX186 connected via SPI to Xmega128a1 1
2,180

Commented by alex.forencich on Thu. Sep 1, 2011 - 09:54 PM

MAX186 connected via SPI to Xmega128a1 Commented by alex.forencich on Thu. Sep 1, 2011 - 09:54 PM
Normal topic AVROSP vs. ATxmega128A1 3
2,624

Commented by clawson on Thu. Sep 1, 2011 - 06:53 PM

AVROSP vs. ATxmega128A1 Commented by clawson on Thu. Sep 1, 2011 - 06:53 PM
Normal topic Pin compatibility between USB and non-USB XMEGAs..? 4
3,238

Commented by dmginc on Thu. Sep 1, 2011 - 12:32 PM

Pin compatibility between USB and non-USB XMEGAs..? Commented by dmginc on Thu. Sep 1, 2011 - 12:32 PM

Pages

Legend

New or Updated Discussion
Discussion
Locked Discussion
New or Updated Hot Discussion
Hot Discussion
Sticky Discussion or Announcement
New or Updated Sticky Discussion