When i open the help this is what happen .. Why? .. and what is the solution?
Title correct - mod
I had this happen once and it was because I did not download the help file and Studio was looking to the atmel/micrchip site for it.
Is the PC that has Studio on it connected to the Internet when you try to view the help file?
Download the help file as well.
If you want a career with a known path - become an undertaker. Dead people don't sue! - Kartman
Please Read: Code-of-Conduct
Atmel Studio6.2/AS7, DipTrace, Quartus, MPLAB user
at the first installation at the left box i have only the fist link (Help wiever Home), i download the other help file (the other link appear but the problem persist); i download the installation software from the Atmel Studio official site.
Go back into Studio. Exit out of the help screen and click on HELP>ADD/REMOVE HELP CONTENT
You should see a screen like this one:
Simply find the help files you want and click ADD. Once the files are installed you should see in the STATUS column the word LOCAL. Check that you have this for teh other modules you downloaded.
if i connect to Win7 like administator the help wiever run ok, if i connect to Win7 like poweruser the help wiever donìt run right.
Then you will need to adjust your settings in your PC Profile?
It's possible that your IT group will need to ease up some restrictions if its working in Administrator profile, but not power user.
© 2018 Microchip Technology Inc.