I was having a lot of problems with AVR Studio 5 so I decided to downgrade to good old AVR Studio 4.
I have been trying for hours to get it to compile with WinAVR and having no luck.
This is the error I get when I try to compile:
rm -rf FlameControl.o FlameControl.elf dep/* FlameControl.hex FlameControl.eep Build succeeded with 0 Warnings... mmcu=atmega32a -Wall -gdwarf-2 -std=gnu99 -DF_CPU=16000000UL -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -MD -MP -MT FlameControl.o -MF dep/FlameControl.o.d -c ../FlameControl.c /usr/bin/sh: -Wall: command not found make: [FlameControl.o] Error 127 (ignored) mmcu=atmega32a FlameControl.o -o FlameControl.elf /usr/bin/sh: FlameControl.o: command not found make: [FlameControl.elf] Error 127 (ignored) avr-objcopy -O ihex -R .eeprom -R .fuse -R .lock -R .signature FlameControl.elf FlameControl.hex avr-objcopy: 'FlameControl.elf': No such file make: *** [FlameControl.hex] Error 1 Build failed with 1 errors and 0 warnings...
Running a fully updated copy of Windows 7 Professional
Any help would be very appreciated,
Thank you all very much!!