ASF Wizard, Add Module to Existing Project

Go To Last Post
2 posts / 0 new
Author
Message
#1
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Hi,

 

I have an existing SAMD21 project in Atmel Studio 7.0.1417 and want to add EEPROM Emulation to it.

 

That sounds really simple.  The ASF GUI is straight-forward.  Just find “EEPROM Emulator Service (driver)” in the Available Modules, click [Add], click [Apply], and there it is in the Selected Modules.

 

One problem: I want to compile it too.

 

eeprom.h: No such file or directory

 

So I installed the bare EEPROM Quick Start example.  It compiles.  It also pulled in BOD, so I included BOD in the project via ASF Wizard.  It still doesn’t compile.

 

bod.h: No such file or directory

 

Then I removed both the EEPROM and BOD modules, then re-added them, then hit [Apply] with both of them together.  That doesn’t work either.  I have the “AT03265: SAM D10/D11/D20/D21/R/L/C EEPROM Emulator (EEPROM) Service” app note open but it doesn’t seem to have any clues.

 

Is there a [Refresh Dependencies] button?

 

What am I missing?

 

Thank you,

 

Mark

 

 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Hi  markjuggles,

 

 

Try creating New -> "Example Project" and select "EEPROM EMULATOR UNIT TEST" project for SAMD21 it works,

May be it needs some dependence which you are missing. you can refer  the example project components.

 

-Partha

 

:-)