HM-10 OLED i2C

Go To Last Post
2 posts / 0 new
Author
Message
#1
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Hey all I am thinking about making an OLED HM-10 module and was wondering if anyone has done this before? I can’t really find anything googling “hm-10 OLED i2C”.

I know the hm-10 has i2C which is pin 2(SCL) and pin 3(SDA). Here are the rest of the pinouts (https://github.com/nickswalker/ble-dev-kit/wiki/HM-10-Pinout).

Can I use the Adafruit arduino code ( https://learn.adafruit.com/monochrome-oled-breakouts/arduino-library-and-examples) that they have on the hm-10? I won’t be hooking up the hm-10 to an arduino it will just be a stand alone thing. I will be using the arduino ide however.

So if anyone could help me out with this then that would be great!

Last Edited: Sun. Feb 4, 2018 - 12:34 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

You are using the wrong magic words.

 

HM-10 is a bluetooth module and it is not a display.

The Adafruit display you link to has an SSD1306 controller chip.

Search for SSD1306, that's a better magic word.

https://github.com/search?q=SSD1306

Paul van der Hoeven.
Bunch of old projects with AVR's:
http://www.hoevendesign.com