[CODE] [C] Driving an RTL8019AS with Atmel128

Go To Last Post
2 posts / 0 new
Author
Message
#1
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

For a school project I need a microcontroller to drive ethernet communication. I have wiring done up for a Realtek RTL8019AS to an Atmel128, but the startup code that came from the ethernet vendor (EDTP.com) does not get my card running on the local network. It was designed for an Atmel16, so port names and functions are quite a bit different. I have heard that books by Fred Eady are a good resource, but I have not had a chance to purchase it yet.

Is there a chance anyone has something useable that I could port to my project, or an online resource better than the vendor's attempt?

Thanks,

Attachment(s): 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

look at
http://www.achatz.nl/index_besta...

you can find all infos and sources, there.
ATmega128+RTL8019AS

Franz