Recent Discussions

RSS

Posted by jgmdesign on Sat. Jan 24, 2015 - 03:08 AM
I don't know where the 'gender smack' from my side came from. The title "What a fool believes" does not specify gender. I'm a tad displeased my ethics are...
Posted by jgmdesign on Sat. Jan 24, 2015 - 06:56 PM
Well if I duplicated Ross, that was unintentional.....Although imitation is the greatest form of flattery..
Posted by tblough on Wed. Nov 5, 2008 - 12:11 PM
Zetex, ti and maxim have specific devices to address your problem - not sure about power consumption though. Putting agnd at anything different to the voltage...
Posted by kor'Dong on Mon. Jan 26, 2015 - 01:54 AM
Hi, There are questions about the "DIG1, DIG2"(Radio Transceiver Antenna Diversity Control Output) I Use ATMEGA128RFA1 and RF6505, tries to Antenna Diversity...
Posted by bkerin on Thu. Jan 22, 2015 - 10:15 PM
You missed hall effect. There's a number of power measurement ics that if your quantity is high enough will come in under a dollar. The concept of using the '...
Posted by PhillyNJ on Sun. Jan 25, 2015 - 01:40 AM
PhillyNJ wrote:   valusoft wrote:     I make sure that the "via" coincides with a through hole component such as a resistor, diode, small bodied...

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
did you check the tutorials forum section. There is an excelent thread there about how to do this. It might be handy for future use.   my first guess is...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
Hi there,     If the purpose of the project is to find the maximum current you can draw from a USB port then you will need to place a very low value...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...
Posted by jgmdesign on Sat. Jan 3, 2015 - 04:12 PM
John_A_Brown wrote: Of course they pay off. Take an extreme case. You're only at home on Christmas day. Do you leave the heating at 21 C all the year round, or...