Recent Discussions

RSS

Posted by Rohalamin on Sat. Jan 31, 2015 - 04:04 PM
http://www.youtube.com/watch?v=7oSH-aZKyU8   http://www.youtube.com/watch?v=ytNpVQJyqJQ
Posted by AKnick on Fri. Jan 30, 2015 - 04:45 PM
As above, all my watchdog needs on the 328p is the code: //Write a logical one to WatchDog Change Enable (WDCE) and WatchDog Enable (WDE) WDTCSR = (1 <...
Posted by shtela on Sat. Jan 31, 2015 - 10:33 AM
You haven't made any pin to an output. Yes, you have the code for it in "INIT_PORT", but you don't call it anywhere. Hence all pins are inputs with a weak...
Posted by podadam on Sun. Jan 25, 2015 - 10:37 PM
In practice,  you pre-compute the value of USICR.   Then the clocking is done by a simple assignment.  e,g. USICR = pre_computed_value...
Posted by aerhead on Sat. Jan 31, 2015 - 02:30 PM
Honestly, I would do this with a stepper motor.  Speed is directly controllable with no real need for an encoder.   However if you want to persevere...
Posted by florian23 on Sat. Jan 31, 2015 - 03:14 PM
Hi,   I'm wondering if we could easily change from 16 to 32-Bit addressing? It seems we need to truncate the addresses for the MAC and need to make sure...

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
did you check the tutorials forum section. There is an excelent thread there about how to do this. It might be handy for future use.   my first guess is...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
Hi there,     If the purpose of the project is to find the maximum current you can draw from a USB port then you will need to place a very low value...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...
Posted by jgmdesign on Sat. Jan 3, 2015 - 04:12 PM
John_A_Brown wrote: Of course they pay off. Take an extreme case. You're only at home on Christmas day. Do you leave the heating at 21 C all the year round, or...