Recent Discussions

RSS

Posted by unebonnevie on Sat. Dec 20, 2014 - 06:49 PM
Hi,   I have the attached the generated makefile from Atmel Studio 4.19, but keep getting the below errors when I issue the make command from WinAVR,...
Posted by mainr on Fri. Dec 19, 2014 - 03:33 PM
I think that round(fVal)+0.5-0.5 will do what is desired. In principle, 0.5-0.5 could be -0.0, but I expect that most hardware and software produce +0.0 ....
Posted by Rohalamin on Sat. Dec 20, 2014 - 06:05 PM
Ciao freaks Guys, is there any TV channel for the Embedded Word? in fact, I mean is there any TV channel which speak about the Embedded systems, MPUs, MCUs, EE...
Posted by darksoul_ua on Sat. Dec 20, 2014 - 05:04 PM
I was quoting directly from the Arduino-1.0.6-windows distribution as you can see from my message. #define OPTIBOOT_MAJVER 4 #define OPTIBOOT_MINVER 4 I have...
Posted by slow_rider on Wed. Dec 17, 2014 - 11:54 AM
why just use a flip flop to divide input clock by 2 and use this signal to TO ( input Timer0 max input f= 20MHz) Need a tiny CPU with 2 timer or a atmega if...
Posted by rajesh279 on Thu. Dec 18, 2014 - 01:34 PM
To avoid further off-topic stuff in this thread, go here http://www.avrfreaks.net/forum/one-forum-rule-them-all for forum-related comments

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
clawson wrote: Maybe its just me, but clicking on any links that I've found using google to "old" forum content just end up going to the home page of the new...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by ka7ehk on Fri. Jul 11, 2014 - 08:29 PM
Often a decaying average is enough. But if you do not want to have any historical data after a given number of sampls, the simple moving average is better...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
valusoft wrote:   microcarl wrote:    Two amplifiers, each with a total gain of approximately 27 would be nearly perfect: G = 5V / 185mV...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...