Recent Discussions

RSS

Posted by jarppi on Sat. Dec 20, 2014 - 07:22 PM
Maybe say...     What is the goal?  what has been done so far? What is the test schematic? Is it a dev board or a bread board? What have you...
Posted by Rohalamin on Sat. Dec 20, 2014 - 06:05 PM
You can check out EEVBlog on YouTube but it's more a general electrical engineering blog. He doesn't really talk about different mcu's.
Posted by clawson on Mon. Dec 8, 2014 - 01:48 PM
zbaird wrote: I did hear from Johan today and all seems well.  No details on the absence, but he says he will be back. Glad to hear that he's ok, but...
Posted by joeymorin on Sun. Dec 21, 2014 - 03:41 AM
Did I miss a memo?   I know it was meant to be a temporary forum until the new site as stable, but I don't recall a recent announcement concerning it's...
Posted by giorgos3924 on Sun. Dec 21, 2014 - 12:24 AM
the first step is to read the datasheet so you understand the operation and constraints when using the flash. Then you read the manual on your compiler toolset...
Posted by slow_rider on Wed. Dec 17, 2014 - 11:54 AM
A better approach would be to use a 74HCT4040.  NXP makes one that operates at 79MHz @ 25 degrees C.   Digikey sells them in quantity of one for 46...

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
clawson wrote: Maybe its just me, but clicking on any links that I've found using google to "old" forum content just end up going to the home page of the new...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by ka7ehk on Fri. Jul 11, 2014 - 08:29 PM
Often a decaying average is enough. But if you do not want to have any historical data after a given number of sampls, the simple moving average is better...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
valusoft wrote:   microcarl wrote:    Two amplifiers, each with a total gain of approximately 27 would be nearly perfect: G = 5V / 185mV...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...