Recent Discussions

RSS

Posted by marathonman on Mon. Jan 26, 2015 - 05:32 AM
Here's whack number 1 at it
Posted by Bergie5737 on Mon. Jan 26, 2015 - 03:02 PM
Which AVR? Does it have differential ADC channels?
Posted by aagamb12 on Tue. Jan 27, 2015 - 01:02 AM
Hello everyone.  I have GE concord alarm system at home. it has 2 panels, 1 mother board and several hardwired and wireless sensor. I would like to enable...
Posted by regnar86 on Tue. Jan 27, 2015 - 12:51 AM
I'm wanting to generate two pwm signals (125Hz @ 25% Duty Cycle) and (250Hz @ 25% Duty Cycle) continuously on two pins in a assembly program. I'm having...
4K
Posted by joeymorin on Mon. Jan 26, 2015 - 05:00 PM
Congrats, Joey!   JC
Posted by Someguy22 on Mon. Jan 26, 2015 - 11:27 AM
Also, if you are going to use alternative heat sources, for heating or cooking, do think about getting a CO detector!   JC

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
did you check the tutorials forum section. There is an excelent thread there about how to do this. It might be handy for future use.   my first guess is...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
Hi there,     If the purpose of the project is to find the maximum current you can draw from a USB port then you will need to place a very low value...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...
Posted by jgmdesign on Sat. Jan 3, 2015 - 04:12 PM
John_A_Brown wrote: Of course they pay off. Take an extreme case. You're only at home on Christmas day. Do you leave the heating at 21 C all the year round, or...