Recent Discussions

RSS

Posted by theincride on Sun. Dec 21, 2014 - 07:40 PM
Servisol has always been a good pot fixer (and old TV tuners too) for me .   The 4th leg of the pot is usually used for loudness control at low volume (...
Posted by Bugx Raja on Mon. Dec 22, 2014 - 10:47 AM
Bugx Raja wrote:  When using ISR (ANALOG_COM_vect) the project ain't working.   My mental telepathy skull cap is being repaired at the moment,...
Posted by rasta on Sun. Dec 21, 2014 - 07:51 PM
Thank you for your reply. I'm using ATMEGA in PDIP so it's pin 34 (PA6 - ADC6). When i'm connecting ADC pin directly to VCC i get 1020 result. GND: 975 VCC:...
Posted by Vindhyachal Takniki on Mon. Dec 22, 2014 - 08:38 AM
Vindhyachal Takniki wrote: To Add End application: Will be switching main on or off depending upon some condition. Input driving : 12V dc Output control : 220V...
Posted by ganeshs on Mon. Dec 22, 2014 - 09:32 AM
Yes David.   LP version is same as 89C51 in case of ISP.   Regards, Ganesh
Posted by AdityaAVR on Tue. Dec 16, 2014 - 10:00 AM
what should be the F_CPU in ATmega32? The same as the F_CPU of the other chip, we don't know how you have things set up in your project.   It is likely...

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
clawson wrote: Maybe its just me, but clicking on any links that I've found using google to "old" forum content just end up going to the home page of the new...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by ka7ehk on Fri. Jul 11, 2014 - 08:29 PM
Often a decaying average is enough. But if you do not want to have any historical data after a given number of sampls, the simple moving average is better...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
valusoft wrote:   microcarl wrote:    Two amplifiers, each with a total gain of approximately 27 would be nearly perfect: G = 5V / 185mV...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...