Recent Discussions

RSS

Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
sparrow2 wrote: And if you know C then write some GCC code and look at the ASM output. Optimal code (speed) for AVR are very different from 6502   I'm...
Posted by jabba80 on Wed. Oct 22, 2014 - 08:13 AM
See my topic: http://www.avrfreaks.net/forum/avr32-linking-without-trampoline There seems to be something funny going on with the linker if you remove the...
Posted by Bingo600 on Wed. Oct 22, 2014 - 07:46 PM
Scenario 1: FTDI's driver refuses to work with clone and tells user that they have a clone. User can then take it back to seller. Users might be annoyed, but...
Posted by sdrollinger on Mon. Oct 20, 2014 - 06:06 AM
Do you have a debugger available? I would suggest starting a debug session, doing what you normally would to get it to "hang" and the pausing the debugger to...
Posted by gmetaxas on Sat. Oct 25, 2014 - 07:47 PM
Mikech, yes, the SO pin is connected to the MISO on the uC. I did not check the ~CS line, though; I'll do it tomorrow morning. SPI mode is initialize to Mode 0...
Posted by petter@inventech.no on Fri. Sep 14, 2012 - 07:54 AM
How to read the memory space where MAC address stored in the Atmega256RFR2 zigbit ?   Thanks,

Buzzing Topics (Last 6 Months)

RSS

Posted by brunomusw on Thu. Jun 12, 2014 - 05:59 PM
Thus we iranian are not lone. British and or even brazilians-self. :wink:
Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
clawson wrote: Maybe its just me, but clicking on any links that I've found using google to "old" forum content just end up going to the home page of the new...
Posted by JohanEkdahl on Mon. May 19, 2014 - 07:32 PM
Quote:And hopefully someone will fix it now instead of waiting until we drown. This assumes that the vulnerability is currently exploited. I do not see...
Posted by ka7ehk on Fri. Jul 11, 2014 - 08:29 PM
I didn't read all 11 pages of this thread, only the first couple. Here's a portable branch-free approach: int n = <10-bit input>; n = (n ^ 0x200) -...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...
Posted by checkingavrout on Wed. May 7, 2014 - 11:33 AM
if( ( new > old + 99 ) || ( new < old - 99 ) ) would be easier to read with #define THRESHOLD 99 if (abs (new - old)) > THRESHOLD) Notice that...