Recent Discussions

RSS

Posted by rula777 on Thu. Jan 29, 2015 - 10:52 PM
http://blog.antronics.co.uk/2011/08/08/so-youre-thinking-of-starting-with-c/   http://www.avrfreaks.net/comment/1138166#comment-1138166  
Posted by luvocean1 on Fri. Jan 30, 2015 - 12:04 AM
Hmm...have only recently discovered this. Almost 8/10 times I am getting this Verify error at some sections < 8Kb in the chip. Sometimes over 8Kb too. But...
Posted by Palmitoxico on Thu. Jan 29, 2015 - 11:28 PM
Hi people!   I've recently wrote a template project for AVR microcontrollers that I would like to share with you: https://github.com/Palmitoxico/...
Posted by regnar86 on Wed. Jan 28, 2015 - 08:41 PM
westfw wrote: Give up the idea of programming in assembler.  :-( For example, most ARM vendors do not provide an equivalent of the xxx.inc files that...
Posted by Barry Stephen Kelly on Thu. Jan 29, 2015 - 11:48 AM
Spoke too soon...   The above DID get the port working, but I still have the original problem - the timer is not working.  Here is the (comments...
Posted by slow_rider on Wed. Jan 28, 2015 - 04:04 PM
I see... OK so I now disabled the overflow interrupt, so here is my new code in the for loop: for(uint8_t i=0;i<256;i++) { R2RDACWrite(i...

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
did you check the tutorials forum section. There is an excelent thread there about how to do this. It might be handy for future use.   my first guess is...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
Hi there,     If the purpose of the project is to find the maximum current you can draw from a USB port then you will need to place a very low value...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...
Posted by jgmdesign on Sat. Jan 3, 2015 - 04:12 PM
John_A_Brown wrote: Of course they pay off. Take an extreme case. You're only at home on Christmas day. Do you leave the heating at 21 C all the year round, or...