Recent Discussions

RSS

Posted by Entropy109 on Mon. Oct 6, 2014 - 11:36 AM
hi sir i m only trying to show the result of my ultrasonic module (hcsr-04) on lcd in cm but  i m facing a problem that my code is working good but it is...
Posted by dylanmckay on Wed. Jan 28, 2015 - 09:50 PM
Anyway why is it that you have to conglomerate the handling of all these opcodes anyway? I have tried alternative methods, but all of them have fallen through...
Posted by marathonman on Mon. Jan 26, 2015 - 05:32 AM
marathonman wrote:....works very good except for my east parking   Or, design the tracking so it does not need east parking, but can find the sun-peak...
Posted by Maks Delanight on Fri. Jan 30, 2015 - 03:45 AM
Hi guys   Thanks for the replies - much appreciated!   I think the only solution for my problem is that I sit down and go through the code, line by...
Posted by kolmik34 on Mon. Jan 12, 2015 - 05:38 PM
Running SPI at 8MHz assumes, that the SPI clock is syncronous to the transceiver clock. you can use the transceivers CLKM signal as reference to sync. the SPI...
Posted by regnar86 on Sat. Jan 31, 2015 - 04:04 AM
Fwhy do you think you need an external oscillator for the AVR? Are you expecting to do something that uses the uart or need the higher speed of 16 or 20MHz?...

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
did you check the tutorials forum section. There is an excelent thread there about how to do this. It might be handy for future use.   my first guess is...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
Hi there,     If the purpose of the project is to find the maximum current you can draw from a USB port then you will need to place a very low value...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...
Posted by jgmdesign on Sat. Jan 3, 2015 - 04:12 PM
John_A_Brown wrote: Of course they pay off. Take an extreme case. You're only at home on Christmas day. Do you leave the heating at 21 C all the year round, or...