Recent Discussions

RSS

Posted by js on Sat. Jan 31, 2015 - 03:43 AM
IoT hair tonic? The Huffington Post Hair Loss Cure Isn't Here Yet, But Experimental Stem Cell Approach Looks Promising by David Freeman Posted: 01/30/2015 9:...
Posted by Plecto on Sun. Feb 1, 2015 - 08:09 AM
Duplicate: http://www.avrfreaks.net/forum/supplying-atmega328-33v-what-happens-if-i...  
Posted by woodyboyd on Sat. Jan 31, 2015 - 07:24 PM
I have not touched the rzusbstick, it is right out of the box. my understanding that installing the device drivers and application is enough.   the...
Posted by slow_rider on Wed. Jan 28, 2015 - 04:04 PM
Here's a quick little ICP routine that I did recently.  It was more of a frequency comparator than an actual measurement, but the timer setup and...
Posted by kamhagh on Sun. Feb 1, 2015 - 03:48 PM
avrisp -c gives avrdude: Device signature = 0x000000 (retrying)  but i guess its just connection problem let me check cables! i hate this stupid...
Posted by chauvoluuhuong on Mon. Jan 26, 2015 - 02:51 PM
http://diodes.com/catalog/single_ldos_66/ap2210.html Recommend also consider an LDO's PSRR; some LDOs have a marginal to poor PSRR. iow, the noise is coming...

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
did you check the tutorials forum section. There is an excelent thread there about how to do this. It might be handy for future use.   my first guess is...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
Hi there,     If the purpose of the project is to find the maximum current you can draw from a USB port then you will need to place a very low value...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...
Posted by jgmdesign on Sat. Jan 3, 2015 - 04:12 PM
John_A_Brown wrote: Of course they pay off. Take an extreme case. You're only at home on Christmas day. Do you leave the heating at 21 C all the year round, or...