Recent Discussions

RSS

Posted by Peddro on Wed. Jan 28, 2015 - 02:24 PM
I am a beginner in programming microcontrollers and I didn't know that the codes of characters in datasheet of the LCD are same as the codes in ASCII, now I...
Posted by berkay91 on Tue. Jan 27, 2015 - 11:47 PM
thanks to everybody
Posted by UniAcc on Wed. Jan 28, 2015 - 12:12 PM
Should probably breadboard it to make really sure (especially the note for the pull-up needed on the reset line) and to make sure that other components...
Posted by sam.n.johnston@... on Tue. Jan 27, 2015 - 03:41 AM
gchapman wrote: Some transceivers contain a switched termination. Yeah, I saw those, like the MAX487. The price in transmission speed is a little high...
Posted by Bergie5737 on Mon. Jan 26, 2015 - 03:02 PM
I have a SLA battery monitor using a T25, I used .1% resistors in my VD circuit (still only pennies each) so I would get reasonable accuracy with out much need...
Posted by banedon on Sun. Jan 25, 2015 - 05:06 PM
I've tried that, but without any success - the display just doesn't initialise (although it is powered). Because LCDwrite8bit is >>WRONG<< and...

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
did you check the tutorials forum section. There is an excelent thread there about how to do this. It might be handy for future use.   my first guess is...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
Hi there,     If the purpose of the project is to find the maximum current you can draw from a USB port then you will need to place a very low value...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...
Posted by jgmdesign on Sat. Jan 3, 2015 - 04:12 PM
John_A_Brown wrote: Of course they pay off. Take an extreme case. You're only at home on Christmas day. Do you leave the heating at 21 C all the year round, or...