Recent Discussions

RSS

Posted by hackdog on Sat. Jan 31, 2015 - 02:00 PM
theusch wrote: If you are only concerned with square waves, then why the DAC? How can you "further optimize" simple square wave generation, especially if 50%...
Posted by mixer188 on Thu. Jan 29, 2015 - 12:18 AM
hi, guys, next step   #include <avr/io.h> #define F_CPU 1000000UL // 1 MHz #define CPU_TYPE __AVR_ATtiny25__ ??? #include <util/delay.h> 1...
Posted by Rohalamin on Tue. Jan 27, 2015 - 05:07 PM
In an open ecosystem with fauna : The Times of India The man who made a forest by Manimugdha S Sharma, TNN | Apr 1, 2012, 07.06AM IST http://timesofindia....
Posted by Maks Delanight on Fri. Jan 30, 2015 - 03:45 AM
The pixel clock is the same in both modes (25.174 MHz), as is the horizontal sync frequency. The difference is that the vertical sync (frame rate) is 70 Hz...
Posted by marathonman on Mon. Jan 26, 2015 - 05:32 AM
The motors i have are geared down to 5 RPM but this will be just for my one panel. the heavy duty system will handle up to 8 or 9 amps in which i may consider...
Posted by kolmik34 on Mon. Jan 12, 2015 - 05:38 PM
Thank you for the help, but I still looking for a solution to the problem, yet I do not know whether the problem is related to the hardawe or software. I've...

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
did you check the tutorials forum section. There is an excelent thread there about how to do this. It might be handy for future use.   my first guess is...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
Hi there,     If the purpose of the project is to find the maximum current you can draw from a USB port then you will need to place a very low value...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...
Posted by jgmdesign on Sat. Jan 3, 2015 - 04:12 PM
John_A_Brown wrote: Of course they pay off. Take an extreme case. You're only at home on Christmas day. Do you leave the heating at 21 C all the year round, or...