Recent Discussions

RSS

Posted by jpanzarella on Sat. Jan 24, 2015 - 09:17 PM
Since this is an Arduino Mega2560 connect to your PC via the USB socket and load the following sketch.   /* Serial test Modified from the Mega...
Posted by crwper on Sun. Jan 25, 2015 - 03:07 AM
Hi all--   I'm working on an experiment in the 2.4 GHz ISM band. At the moment, the main thing I'm trying to accomplish is mixing the 2.4 GHz signal down...
Posted by stevech on Sat. Jan 24, 2015 - 11:15 PM
Installed on my Samsung phone just fine but my "nextbook" tablet (kitkat) complains "not enough space" when 4Gb should be available (??)
Posted by Andrewiski on Wed. Feb 5, 2014 - 07:59 PM
Thank you so much for posting this workaround. Like others here, Device Mangler showed Atmel USB Devices/AT32UC3A was present, but AS6.2 couldn't see it.
Posted by pderocco on Thu. Apr 25, 2013 - 04:00 AM
Hi all, I can see that the current bootloader need a switch or input port to select that bootloader routine. Do any one got a better idel or way? other then...
Posted by PhillyNJ on Sun. Jan 25, 2015 - 01:40 AM
Its tough when the part covers the upper pad.   You could, of course, have a separate via, and solder a small wire that has been placed through the via,...

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
did you check the tutorials forum section. There is an excelent thread there about how to do this. It might be handy for future use.   my first guess is...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
Hi there,     If the purpose of the project is to find the maximum current you can draw from a USB port then you will need to place a very low value...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...
Posted by jgmdesign on Sat. Jan 3, 2015 - 04:12 PM
John_A_Brown wrote: Of course they pay off. Take an extreme case. You're only at home on Christmas day. Do you leave the heating at 21 C all the year round, or...