Recent Discussions

RSS

Posted by jmaja1 on Sat. Jan 31, 2015 - 12:14 PM
jmaja1 wrote: So the answer is you can't get more than one virtual com port in Windows from one USB using AVR? It's doable, with a bit of complication. I can...
Posted by valusoft on Sat. Sep 20, 2014 - 12:56 PM
If only the report post function would allow one to specify the reason for the report... Say, hard coded check boxes for the most common reasons + a text entry...
Posted by Rohalamin on Tue. Jan 27, 2015 - 05:07 PM
John_A_Brown wrote:I reckon Morph was earlier: http://en.wikipedia.org/wiki/Morph_%28animation%29 Same people, though.Interesting, I wasn't aware of it (I don'...
Posted by podadam on Sun. Jan 25, 2015 - 10:37 PM
  Not sure this will run on a too-tiny, but among the radios supported are the too-cheap NRF24L01's http://www.airspayce.com/mikem/arduino/RadioHead/
Posted by naqirizvi on Fri. Jan 30, 2015 - 09:01 AM
THANK YOU BUDDY. You are the man, You did it. Now I got my lcd working on 12MHZ  just by changing my lfuse =ff hfuse=99 efuse=ff I also mentioned  #...
Posted by aerhead on Sat. Jan 31, 2015 - 02:30 PM
Torby, The motor I'm using now (I'm not using the one with the encoder yet) isn't able to start the speedometer without going over current then once it gets...

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
did you check the tutorials forum section. There is an excelent thread there about how to do this. It might be handy for future use.   my first guess is...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
Hi there,     If the purpose of the project is to find the maximum current you can draw from a USB port then you will need to place a very low value...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...
Posted by jgmdesign on Sat. Jan 3, 2015 - 04:12 PM
John_A_Brown wrote: Of course they pay off. Take an extreme case. You're only at home on Christmas day. Do you leave the heating at 21 C all the year round, or...