Recent Discussions

RSS

Posted by pk72 on Tue. Jan 27, 2015 - 04:51 PM
Hi, I set up the ADC on the xmega A3BU xplained board (atxmega256a3bu) based on an ASF example. Configuration is single ended, free running, 12bit resolution,...
Posted by madcitysw on Sun. Jan 25, 2015 - 11:38 PM
OK so I just added the <avr/io.h> and the following at the end: Cled Red(&PORTB, &DDRB, (1 << PB5), &PINB); int main(void) { Red....
Posted by valusoft on Sun. Jan 11, 2015 - 12:27 PM
Congratulations Australia! I think Australia going to be won! they will grab the cup!
Posted by Gandalf22 on Tue. Jan 27, 2015 - 02:49 PM
Atmel studio was proposing this so I used this notation.   Very interesting.  Are you absolutely sure you are building for the correct AVR model?...
Posted by sam.n.johnston@... on Tue. Jan 27, 2015 - 03:41 AM
Ethernet can go over coax as well as over twisted pair.  Think 10base2.  This has the advantage that it's still one single bus as opposed to using...
Posted by Treesrule14 on Sun. Jan 25, 2015 - 08:02 PM
1. I laughed about the Mississipi's and the thumb. I use the middle finger btw. It all depends on where you want the blister when the test "fails".  ;)...

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
did you check the tutorials forum section. There is an excelent thread there about how to do this. It might be handy for future use.   my first guess is...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
Hi there,     If the purpose of the project is to find the maximum current you can draw from a USB port then you will need to place a very low value...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...
Posted by jgmdesign on Sat. Jan 3, 2015 - 04:12 PM
John_A_Brown wrote: Of course they pay off. Take an extreme case. You're only at home on Christmas day. Do you leave the heating at 21 C all the year round, or...