Recent Discussions

Posted by Claigodi on Wed. Mar 25, 2015 - 11:26 AM
Now it's all clear. Thanks everybody
Posted by akshayingle on Tue. Mar 24, 2015 - 06:46 AM
But this is still a true statement of fact isn't it? Technically true, but...
Posted by Chupo_cro on Mon. Mar 9, 2015 - 05:10 PM
I've only today got some small 3-phase motor for testing (I have some 4+ kW and about 1.1 kW motors without the labels but these are too heavy to...
Posted by Mk_Dy on Thu. Mar 26, 2015 - 11:05 PM
Hi,   I am trying to set up the ADC as follows: AutoTrigger enabled for Timer0/Counter 0 rollover...
Posted by hugo_habicht on Thu. Mar 26, 2015 - 05:35 AM
I've never written an RTOS but I'm with clawson, why do you need a separate stack?   ...
Posted by Sebas06 on Mon. Mar 23, 2015 - 06:39 AM
You might want to change your port pin for each of the dds- currently its all PD3. A tick of 100KHz seems a tad high. You only have 200 clocks to complete...


Posted by S-Sohn on Wed. Aug 27, 2008 - 06:30 PM

Commented by alank2 on Wed. Mar 25, 2015 - 08:43 PM

Here is a project I just completed, a joint project with tpappano (he laid out the pcb!).  I'll offer this for sale here or on eBay once...
Posted by alexru on Mon. Sep 24, 2012 - 11:49 PM

Commented by alexru on Fri. Feb 27, 2015 - 06:41 PM

Just disable routing. No route discoveries will be performed and all devices will be assumed to be within direct link range.
Posted by abcminiuser on Sun. Dec 11, 2011 - 11:01 AM

Commented by DocJC on Mon. Dec 8, 2014 - 02:58 AM

I always pictured everyone with more hair... At least those of us without a lot of hair...
Posted by microcarl on Sun. Jan 22, 2006 - 05:08 PM

Commented by foldgecko on Mon. Mar 23, 2015 - 07:49 AM

Nice work area you got there, a bit messy but at least you got your own space to work. 
Posted by kubark42 on Thu. Jul 24, 2008 - 03:30 PM

Commented by clawson on Fri. Feb 13, 2015 - 09:40 AM

Just to say (despite how it looks!) this thread isn't really the place to diagnose FatFs and/or SD/MMC usage problems. The plan should be that...
Posted by Bingo600 on Wed. Oct 4, 2006 - 08:44 PM

Commented by Bingo600 on Thu. Nov 20, 2014 - 09:02 PM