Recent Discussions

RSS

Posted by prathibha on Mon. Dec 22, 2014 - 08:39 AM
Thank you ,   but i am getting the led on first and later Relay getting on.But as per our requirement both should be on at a time,Anything am i missing in...
Posted by vj_25 on Sun. Dec 21, 2014 - 07:14 PM
You can also use a lookup  table.   After the first press the first value from the table is copied to portb. After the second press the second value...
Posted by joeymorin on Sun. Dec 21, 2014 - 03:41 AM
It slowly starts to look like choosing drupal as forum base is giving more and more issues.... Yeah, but we're getting longer and loooonger to think about...
Posted by prathibha on Mon. Dec 22, 2014 - 08:39 AM
Hi,     I am working on atxmega128a1u,How to make two GPIOS high at a time using timers.Kindly guide me.  
Posted by Vindhyachal Takniki on Mon. Dec 22, 2014 - 08:38 AM
1. I need low cost 5 pin, 12V relay with SPDT & in both NC & NO state current should be 30A or higher. 2. Any suggestions? 3. I have searched this...
Posted by drnicolas on Mon. Dec 22, 2014 - 08:36 AM
I updated to AS 6.2 These days and try now to debug an older Project. Firmware of my JTAGICE3 was also updated.   Sometimes my Debugging worked okay, but...

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
clawson wrote: Maybe its just me, but clicking on any links that I've found using google to "old" forum content just end up going to the home page of the new...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by ka7ehk on Fri. Jul 11, 2014 - 08:29 PM
Often a decaying average is enough. But if you do not want to have any historical data after a given number of sampls, the simple moving average is better...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
valusoft wrote:   microcarl wrote:    Two amplifiers, each with a total gain of approximately 27 would be nearly perfect: G = 5V / 185mV...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...