Recent Discussions

RSS

Posted by joeymorin on Sun. Dec 21, 2014 - 03:41 AM
 
Posted by jgmdesign on Sat. Dec 13, 2014 - 01:47 AM
 I would not want to be up there in winter. Or Summer.   Or Fall.   Or Spring.   JC 
Posted by ka7ehk on Mon. Dec 22, 2014 - 12:22 AM
I would consider putting a molly guard over the uSD card.  Flipping the molly guard open presses a switch, telling the mcu to stop recording and close all...
Posted by unebonnevie on Mon. Dec 22, 2014 - 07:38 PM
6800 microprocessor and its serial and parralel interface chips used to work on a biphase clock.   One clock phase was used to validate address decoding...
Posted by koudis on Mon. Dec 22, 2014 - 10:41 PM
Disclaimer: I don't use JTAG and I don't use AVRDude.   Xmegas have a JTAG enable Fuse. Any chance you accidentally disabled it?   Question for those...
Posted by steve17 on Tue. Dec 23, 2014 - 12:19 AM
"During production of the XMEGA-A3BU Xplained board, the production time is stored in the user signature row"

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
clawson wrote: Maybe its just me, but clicking on any links that I've found using google to "old" forum content just end up going to the home page of the new...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by ka7ehk on Fri. Jul 11, 2014 - 08:29 PM
Often a decaying average is enough. But if you do not want to have any historical data after a given number of sampls, the simple moving average is better...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
valusoft wrote:   microcarl wrote:    Two amplifiers, each with a total gain of approximately 27 would be nearly perfect: G = 5V / 185mV...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...