Recent Discussions

RSS

Posted by toalan on Sun. Jan 29, 2012 - 06:16 AM
pcbman wrote: In printed circuit board’s assembly, location plays important role in deciding a cost. Boards assembled in China are cheaper than Canada while...
Posted by PhillyNJ on Fri. Jan 23, 2015 - 09:04 PM
I support your suggestion.
Posted by ka7ehk on Mon. Jan 26, 2015 - 03:20 AM
Ohhh, thank you. I probably would have caught it comparing JC's layout to mine. But maybe not.   Much appreciated!   <EDIT> westfw was right on...
Posted by LOSTISLAND on Sun. Jan 25, 2015 - 02:29 PM
Better to use a software addressing scheme. Device does not pay attention to a transmission unless for its address.   As I described above, reliance on...
Posted by brilliantkape on Sun. Jan 25, 2015 - 05:54 PM
valusoft wrote:I meant you have too much time on your hands.Because of the ASCII art?  I have a secret: copy/paste
Posted by marathonman on Mon. Jan 26, 2015 - 05:32 AM
Welcome to AVRFreaks.   Could you also post a pdf of your schematic. The board layout does not really help that much.   Regards,   Ross  

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
did you check the tutorials forum section. There is an excelent thread there about how to do this. It might be handy for future use.   my first guess is...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
Hi there,     If the purpose of the project is to find the maximum current you can draw from a USB port then you will need to place a very low value...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...
Posted by jgmdesign on Sat. Jan 3, 2015 - 04:12 PM
John_A_Brown wrote: Of course they pay off. Take an extreme case. You're only at home on Christmas day. Do you leave the heating at 21 C all the year round, or...