Recent Discussions

RSS

Posted by rula777 on Thu. Jan 29, 2015 - 10:52 PM
Actually, most of the questions seem to just basic 'C' - not specific to any particular microcontroller?
Posted by naqirizvi on Fri. Jan 30, 2015 - 09:01 AM
Hi, I have interfaced RFID and atmega162 as in picture , but I am getting garbage with blank spaces, hypens on lcd , please see my code and tell me whats could...
Posted by abhi.nagarnaik on Fri. Jan 30, 2015 - 08:44 AM
Hello, I'm doing a project in which I have to save data from input port to EEPROM whenever there is change in the i/p. I'm using mega8L chip 3.7V battery to...
Posted by marien on Fri. Jan 30, 2015 - 08:30 AM
Hi all,   How is it possible to write and read data to from the extended HRAM? I am using the AT32UC3A3256S microcontroller. The AS6.2 compiler/linker...
Posted by slow_rider on Wed. Jan 28, 2015 - 04:04 PM
Your while waiting for overflow needs a fix: while(!(TIFR1&(1<<TOV1))); // Wait for timer1 OVF /Lars
Posted by Pucur on Fri. Jan 9, 2015 - 09:32 AM
Clawson- Im not suprised, just want to explain the whole problem and how I see it. 0x8BCF is a value for freq of 1rpm, =1/60=0.01666Hz... And I multiply that...

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
did you check the tutorials forum section. There is an excelent thread there about how to do this. It might be handy for future use.   my first guess is...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
Hi there,     If the purpose of the project is to find the maximum current you can draw from a USB port then you will need to place a very low value...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...
Posted by jgmdesign on Sat. Jan 3, 2015 - 04:12 PM
John_A_Brown wrote: Of course they pay off. Take an extreme case. You're only at home on Christmas day. Do you leave the heating at 21 C all the year round, or...