Recent Discussions

RSS

Posted by Vindhyachal Takniki on Sat. Nov 29, 2014 - 12:49 PM
@theusch , in my case currently reset pin is left open.   However in board I have jumper connection (which is open currently) , if I short the jumper, it...
Posted by eRony on Sun. Dec 21, 2014 - 10:17 AM
Dear Valusoft,   Ur right    < i am not understand that i should turn the car chassis a little and then measure the obstacle distance again....
Posted by prathibha on Mon. Dec 22, 2014 - 08:39 AM
Thank you Larryvc,   Before writing this code i checked relays indiviually with this code,   #include <avr/io.h> #include<asf.h> //#...
Posted by theincride on Sun. Dec 21, 2014 - 07:40 PM
js wrote: Servisol ... A friend's  elderly father used it for stiff and rheumatic joints, he swore by it and recommended it to anyone with a sore joint....
Posted by MichaSv on Sun. Dec 21, 2014 - 06:47 PM
Hi.   Thanks again for your replies. I looked at the datasheet and some other sources and found that the max period with a 16MHz clock for a 16Bit Timer...
Posted by Bugx Raja on Mon. Dec 22, 2014 - 10:47 AM
Bugx Raja wrote:  When using ISR (ANALOG_COM_vect) the project ain't working.   My mental telepathy skull cap is being repaired at the moment,...

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
clawson wrote: Maybe its just me, but clicking on any links that I've found using google to "old" forum content just end up going to the home page of the new...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by ka7ehk on Fri. Jul 11, 2014 - 08:29 PM
Often a decaying average is enough. But if you do not want to have any historical data after a given number of sampls, the simple moving average is better...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
valusoft wrote:   microcarl wrote:    Two amplifiers, each with a total gain of approximately 27 would be nearly perfect: G = 5V / 185mV...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...