Recent Discussions

RSS

Posted by pk72 on Thu. Jan 29, 2015 - 06:58 PM
Hello Kraal, yes, that was it, thank you so much. I was looking for some kind of lockbit in the manual but did not find the power registers.
Posted by ka7ehk on Fri. Jan 30, 2015 - 06:41 PM
IINM, it is not possible to write to the calibration byte at all. Not from app space, nor from the BLS, nor via ISP, nor via HVPP. There are undocumented ISP...
Posted by djoshi on Fri. Jan 30, 2015 - 11:46 PM
Hi All   I am using the ATMEG1284P and AVR studio 6.2   I have made a UART bootloader, which seems to be working .   But once the boot loader...
Posted by kolmik34 on Mon. Jan 12, 2015 - 05:38 PM
Here it was all about the frequency of SPI - If frequency, of SPI is above 7.5 Mhz stacks do not reads or writes correctly registers of the radio and...
Posted by rsloan on Fri. Sep 12, 2014 - 12:31 AM
Kartman.... u almost convinced me lol...I like a little bit of challange. Umm...how reliable is it? Can you fail it with repeated fast refresh button clicks?...
Posted by kolmik34 on Fri. Jan 30, 2015 - 06:45 PM
Thank you for your reply   What matters is where the function is called SYS_TaskHandler ()? It is only important for it to be called as often as possible...

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
did you check the tutorials forum section. There is an excelent thread there about how to do this. It might be handy for future use.   my first guess is...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
Hi there,     If the purpose of the project is to find the maximum current you can draw from a USB port then you will need to place a very low value...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...
Posted by jgmdesign on Sat. Jan 3, 2015 - 04:12 PM
John_A_Brown wrote: Of course they pay off. Take an extreme case. You're only at home on Christmas day. Do you leave the heating at 21 C all the year round, or...