Recent Discussions

RSS

Posted by kubark42 on Thu. Jul 24, 2008 - 03:30 PM
Yeah that should be quite possible. As this whole thing has hopefully shown the actual dependency on hardware interaction in FatFs is actually really small and...
4K
Posted by joeymorin on Mon. Jan 26, 2015 - 05:00 PM
valusoft wrote:Chuck... it was actually a sobriety test... how did you do?   Don't know.  I did eventually figure it out, just took awhile. ...
Posted by Bergie5737 on Mon. Jan 26, 2015 - 03:02 PM
Thank you so far for the replies.   (Searching for "level shifter" gets actual sensible hits, I searched "level convertors". Once again tripped up by...
Posted by rene on Wed. May 15, 2002 - 12:02 AM
heweb   Please learn forum etiquette. You have cross posted this half finished code. You have hijacked a 13 year old thread. And you have posted the same...
Posted by awneil on Tue. Jan 27, 2015 - 09:15 AM
You either build/debug the 'Start Up' or you build every single project in the Solution (and debug the Startup)   I have been used to Keil or Rowley where...
Posted by kscharf on Tue. Aug 7, 2012 - 01:42 PM
awneil wrote:It seems that the selection of which Project is the StartUp Project is saved in the .atsuo file?   Yes, it is - see: http://...

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
did you check the tutorials forum section. There is an excelent thread there about how to do this. It might be handy for future use.   my first guess is...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
Hi there,     If the purpose of the project is to find the maximum current you can draw from a USB port then you will need to place a very low value...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...
Posted by jgmdesign on Sat. Jan 3, 2015 - 04:12 PM
John_A_Brown wrote: Of course they pay off. Take an extreme case. You're only at home on Christmas day. Do you leave the heating at 21 C all the year round, or...