Recent Discussions

RSS

Posted by kareem101 on Wed. Jan 28, 2015 - 01:21 AM
Shouldnt these codes work the same, or i am messing something ?? because in CTC mode it doesnt work the same   Code 1:   #include <avr/io.h> #...
Posted by BigBlueJim on Fri. Jan 23, 2015 - 05:41 PM
Nothing works natively with 12V.   You just run the MCU at 3.3V or 5V and use appropriate drivers for the 12V.   e.g. ULN2803   You should...
Posted by madcitysw on Sun. Jan 25, 2015 - 11:38 PM
Yes there's a total of 7 Switches/Dual Color Leds, so there would been 7 classes to control each. No, there will be 7 >>instances<<.
Posted by Fianawarrior on Wed. Jan 7, 2015 - 09:47 PM
late at the minute, so I'll look into your advise tomorrow
Posted by podadam on Sun. Jan 25, 2015 - 10:37 PM
No!   Look again at your parentheses!  Right it's if (GetReg(STATUS)==0x0E)That solves one problem that I would of had in the future and I thank...
Posted by gchapman on Fri. Jan 23, 2015 - 03:41 PM
clawson wrote:I am a major fan of McSween's haggis. I have tasted loads of different ones in England and Scotland and this ranks as my favourite: ...Is canned...

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
did you check the tutorials forum section. There is an excelent thread there about how to do this. It might be handy for future use.   my first guess is...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
Hi there,     If the purpose of the project is to find the maximum current you can draw from a USB port then you will need to place a very low value...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...
Posted by jgmdesign on Sat. Jan 3, 2015 - 04:12 PM
John_A_Brown wrote: Of course they pay off. Take an extreme case. You're only at home on Christmas day. Do you leave the heating at 21 C all the year round, or...