Recent Discussions

RSS

Posted by regnar86 on Wed. Jan 28, 2015 - 08:41 PM
regnar86 wrote:... and software security at the low level. ... paste in some links to some development boards you might suggest for me to move up to next. ARM...
Posted by berkay91 on Tue. Jan 27, 2015 - 11:47 PM
Quote:Though you'll need to parse the RIFF header to find where the data starts and what format it is in. If it's not already in 8 or 16-bit PCM you probably...
Posted by mixer188 on Thu. Jan 29, 2015 - 12:18 AM
config_bits = ( config_bits >>3 ) & 0x07; Now you can use the variable in the switch statement.
Posted by shaddai on Thu. Jan 29, 2015 - 03:12 AM
Hi guys-   I've got an issue I hope someone can help me out with. I have an ISR that temporarily unmasks another ISR (to keep it from firing where it's...
Posted by dusteater on Wed. Jan 28, 2015 - 04:07 AM
And I have a dtmf generator that runs on a mega32 and compiles with the excellent imagecraft compiler. It was on the legacy avrfreaks site, but I'll dust it...
Posted by marathonman on Mon. Jan 26, 2015 - 05:32 AM
Old guys know 'procedural' languages. The first one was Fortran in the 50s. C was written at Bell Labs in the 70s. Basic and Pascal came along back then...

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
did you check the tutorials forum section. There is an excelent thread there about how to do this. It might be handy for future use.   my first guess is...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
Hi there,     If the purpose of the project is to find the maximum current you can draw from a USB port then you will need to place a very low value...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...
Posted by jgmdesign on Sat. Jan 3, 2015 - 04:12 PM
John_A_Brown wrote: Of course they pay off. Take an extreme case. You're only at home on Christmas day. Do you leave the heating at 21 C all the year round, or...