Posted by Someguy22 on Fri. Feb 27, 2015 - 08:18 PM
Posted by Vindhyachal Takniki on Sat. Feb 28, 2015 - 06:44 AM
1. I have a digitally controlled resistance series network. 2. What I have done is placing a resistor at output terminals of each relay....
Posted by Vindhyachal Takniki on Fri. Feb 27, 2015 - 08:55 AM
I had searched for some cheap solution. Solution I have got till now, get SIM module, use GPRS and send the data on network. Lowest cost...
Posted by DocJC on Fri. Feb 27, 2015 - 11:53 PM
The 'power enable' input from the Mega32U4 board controller will see the same voltage seen by Q102's gate. Since that passes...
Posted by mexchip on Wed. Feb 25, 2015 - 03:47 PM
That worked fine! Thank you so much :)
BUZZING TOPICS (LAST 6 MONTHS)
Posted by S-Sohn on Wed. Aug 27, 2008 - 06:30 PM
[quote=keith v] max_torque_2008 wrote:
Posted by alexru on Mon. Sep 24, 2012 - 11:49 PM
Just disable routing. No route discoveries will be performed and all devices will be assumed to be within direct link range.
Posted by abcminiuser on Sun. May 20, 2007 - 11:10 AM
The way you do that is to set up a timer in CTC mode with a very low OCR value and have it toggle a pin on the compare event. I seem to remember it's...
Posted by cleaner on Sat. Nov 9, 2013 - 02:23 AM
Or night-vision goggles.
Posted by abcminiuser on Sun. Dec 11, 2011 - 11:01 AM
I always pictured everyone with more hair... At least those of us without a lot of hair...
Posted by kubark42 on Thu. Jul 24, 2008 - 03:30 PM
Just to say (despite how it looks!) this thread isn't really the place to diagnose FatFs and/or SD/MMC usage problems. The plan should be that...