Recent Discussions

RSS

Posted by naqirizvi on Fri. Jan 30, 2015 - 09:01 AM
I googled and found this website. http://treehouseprojects.ca/fusebits/ What I evaluated from web is that I need CLSEL3210 to 1111 SUT10 to 10 CLOUT = 0...
Posted by 2013BRZ on Wed. Jan 21, 2015 - 05:49 AM
As an aside, is the 0.47uF cap big enough to filter out the switching frequency? If you're getting some ripple, that might also be causing havoc due to...
Posted by WhiteWalker on Fri. Jan 30, 2015 - 01:13 PM
Well, thank you for your quick respons.   I can't remeber that the datasheet mentions this.
Posted by Vindhyachal Takniki on Fri. Jan 30, 2015 - 11:58 AM
Normally you would use a ratiometric configuration so that reference errors are negated. You want as much reference/bridge excitation as possible - you are...
Posted by pulli00 on Thu. Jan 29, 2015 - 09:39 AM
That example is adequate for testing but the voltage reference is earth. In the real world you wouldn't measure the mains voltage that way and depending on...
Posted by nohsunghun on Fri. Feb 14, 2014 - 06:51 AM
Are you saying that the DFLL is giving you 32MHz instead of 48MHz ?   If so, did you  read what I said about calibration?

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
did you check the tutorials forum section. There is an excelent thread there about how to do this. It might be handy for future use.   my first guess is...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
Hi there,     If the purpose of the project is to find the maximum current you can draw from a USB port then you will need to place a very low value...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...
Posted by jgmdesign on Sat. Jan 3, 2015 - 04:12 PM
John_A_Brown wrote: Of course they pay off. Take an extreme case. You're only at home on Christmas day. Do you leave the heating at 21 C all the year round, or...