Recent Discussions

RSS

Posted by WhiteWalker on Wed. Jan 28, 2015 - 09:43 AM
Well spotted, christop.   I built the program and witnessed the behaviour.   You should either do a lcd_clear() before each write,   or you...
Posted by podadam on Sun. Jan 25, 2015 - 10:37 PM
Did you change your wiring as Jim suggested in #2 above?      Jim  
Posted by gigante on Fri. Jan 23, 2015 - 01:15 AM
joeymorin wrote: Your makefile doesn't touch the fuses unless you run it against the  setfuses target, and your typescript shows that you didn't, so it's...
Posted by dusteater on Wed. Jan 28, 2015 - 04:07 AM
I would like to learn how to debug this program in order to learn microcontroller programming. The first thing I did was to try and determine if PINB1 (OC1A)...
Posted by Rohalamin on Tue. Jan 27, 2015 - 05:07 PM
Koshchi wrote: I would start raising sheep to try and fill the haggis needs of the U.S. you can start with this sheep: http://www.dailymail.co.uk/news/article...
Posted by jgmdesign on Sat. Jan 24, 2015 - 03:08 AM
Mayhaps when one locks a thread due to perceived upsetting comments, the surpressed comments should be restored so others reading the thread learn a lesson in...

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
did you check the tutorials forum section. There is an excelent thread there about how to do this. It might be handy for future use.   my first guess is...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
Hi there,     If the purpose of the project is to find the maximum current you can draw from a USB port then you will need to place a very low value...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...
Posted by jgmdesign on Sat. Jan 3, 2015 - 04:12 PM
John_A_Brown wrote: Of course they pay off. Take an extreme case. You're only at home on Christmas day. Do you leave the heating at 21 C all the year round, or...