Recent Discussions

RSS

Posted by Barry Stephen Kelly on Thu. Jan 29, 2015 - 11:48 AM
I don't like to look at stuff like that and give no guarantees about my diagnosis.    It looks like the working code enables medium priority...
Posted by Maks Delanight on Fri. Jan 30, 2015 - 03:45 AM
We are all very impressed with what Brad can do with an AVR.     I can never understand how he can write code that is left-flush,  ...
Posted by nohsunghun on Fri. Feb 14, 2014 - 06:51 AM
harmanhr wrote:but i m not getting that 4 what to do with it to increase my speed Think about it: what is the reason why the DFLL output frequency is...
Posted by shtela on Sat. Jan 31, 2015 - 10:33 AM
Good day! Please help me to solve the following problem with ATMega16: When connecting the LED through a resistor 470 Ohm to pin voltage at pin squander with 4...
Posted by regnar86 on Sat. Jan 31, 2015 - 04:04 AM
In practice,   if you have a DS3231 for keeping accurate time,   there is no need to use a crystal with the AVR.   i.e. just run...
Posted by naqirizvi on Fri. Jan 30, 2015 - 09:01 AM
I get upset by unformatted code. int main(void) { DDRC = 0xff; PORTC |= 1 << PINC0; _delay_ms(100); while (1) { PORTC ^= 1...

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
did you check the tutorials forum section. There is an excelent thread there about how to do this. It might be handy for future use.   my first guess is...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
Hi there,     If the purpose of the project is to find the maximum current you can draw from a USB port then you will need to place a very low value...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...
Posted by jgmdesign on Sat. Jan 3, 2015 - 04:12 PM
John_A_Brown wrote: Of course they pay off. Take an extreme case. You're only at home on Christmas day. Do you leave the heating at 21 C all the year round, or...