Recent Discussions

RSS

Posted by naqirizvi on Fri. Jan 30, 2015 - 09:01 AM
Ok, So how to remove that garbage, While displaying on lcd I did it by starting for loop from i=1.. but the very first tag is displayed without errors after...
Posted by Plecto on Sun. Feb 1, 2015 - 08:09 AM
I'm in a little bit of a pickle. I have a board containing an atmega328 a long with some other chips which is currently being supplied with 5V from my Arduino...
Posted by Plecto on Sun. Feb 1, 2015 - 08:09 AM
I'm in a little bit of a pickle. I have a board containing an atmega328 a long with some other chips which is currently being supplied with 5V from my Arduino...
Posted by ka7ehk on Sun. Feb 1, 2015 - 04:30 AM
Thanks for that clarification. That really helps.   Jim
Posted by woodyboyd on Sat. Jan 31, 2015 - 07:24 PM
What firmware are you using in the stick? I doubt that default firmware is ever a sniffer, and if it is, it is not likely to be supported by the sniffer....
Posted by florian23 on Sat. Jan 31, 2015 - 03:14 PM
No, it is not easy to do that. The stack relies on radio performing the address matching and filtering and radio can only do that for 16-bit addresses.  ...

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
did you check the tutorials forum section. There is an excelent thread there about how to do this. It might be handy for future use.   my first guess is...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
Hi there,     If the purpose of the project is to find the maximum current you can draw from a USB port then you will need to place a very low value...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...
Posted by jgmdesign on Sat. Jan 3, 2015 - 04:12 PM
John_A_Brown wrote: Of course they pay off. Take an extreme case. You're only at home on Christmas day. Do you leave the heating at 21 C all the year round, or...