Recent Discussions

RSS

Posted by guggech on Sat. Jan 31, 2015 - 05:28 AM
Hi, I am using an Xmega256D3 using Atmel studio 6.2, AVR/GNU C compiler version 4.8.1 and FreeRTOS. I am running into some weird issue. I have the following...
Posted by regnar86 on Sat. Jan 31, 2015 - 04:04 AM
I always left XTAL1/2 floating when I wasn't using them.  The 328P internal oscillator can run at 8mHz or 128kHz.  The drop down menu in AVR Studio...
Posted by jaminakoop on Sat. Jan 31, 2015 - 05:22 AM
I am Mr. steroid hurry that does not give us license to ignore it or map aggressively deal with the problem there tend to be highly opinionated people on both...
Posted by marathonman on Mon. Jan 26, 2015 - 05:32 AM
bobgardner wrote: You are are asking this question on a forum full of electrical and software engineers. I'm surprised that 10 of them haven't said "Post the...
Posted by fleemy on Sat. Oct 12, 2013 - 02:08 PM
I'm making some progress with my FT800 application.  Nothing pretty just yet, but so far is acting as a simple HMI for viewing/changing a lot of numeric...
Posted by AKnick on Fri. Jan 30, 2015 - 04:45 PM
joeymorin wrote: Quote: and putting WDR as the first line of main() and it didn't work. What didn't work?   Adding a WDR command as the first line of...

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
did you check the tutorials forum section. There is an excelent thread there about how to do this. It might be handy for future use.   my first guess is...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
Hi there,     If the purpose of the project is to find the maximum current you can draw from a USB port then you will need to place a very low value...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...
Posted by jgmdesign on Sat. Jan 3, 2015 - 04:12 PM
John_A_Brown wrote: Of course they pay off. Take an extreme case. You're only at home on Christmas day. Do you leave the heating at 21 C all the year round, or...