Recent Discussions

RSS

Posted by banedon on Sun. Jan 25, 2015 - 05:06 PM
Hello,   Getting these character LCD modules to work is always a pain in the neck.  I'll make two suggestions:   1)  The instruction...
Posted by Plons on Mon. Jan 19, 2009 - 02:39 PM
..maybe you didn't drink enough of it.....
Posted by brilliantkape on Sun. Jan 25, 2015 - 05:54 PM
Why can't people READ THE PURPOSE of this forum BEFORE posting?!!
Posted by Treesrule14 on Sun. Jan 25, 2015 - 08:02 PM
We have a couple of 328p's running at temperatures around 50c on occasion. BTW, I use a  "rule of thumb"  -- >>my<< thumb -- on our...
Posted by jgmdesign on Sat. Jan 24, 2015 - 03:08 AM
Well OK then Bob, you have managed to hijack yet another thread again, so go ahead have your way.  You're not worth the blood pressure.    
Posted by hungryforlearn on Fri. Jan 23, 2015 - 01:27 AM
  I was able to synchronized the ADC using manual mode and using a GIOP interrupt  that was driven by Rising Edge Detection Circuit (AND GATE and NOT...

Buzzing Topics (Last 6 Months)

RSS

Posted by Michael@Atmel on Tue. Aug 26, 2014 - 12:04 AM
did you check the tutorials forum section. There is an excelent thread there about how to do this. It might be handy for future use.   my first guess is...
Posted by Hugh Aguilar on Fri. Oct 24, 2014 - 02:10 AM
Moderators - stop this train wreck now - please!
Posted by mado88 on Mon. Nov 10, 2014 - 03:38 PM
Clawson has true,   I was designed some peripheral boards for lifts - and it is not so simply. There are a lot of standards, norms and regulations. Lift...
Posted by dominicmluciano on Tue. Nov 11, 2014 - 05:42 PM
Hi there,     If the purpose of the project is to find the maximum current you can draw from a USB port then you will need to place a very low value...
Posted by asking on Fri. Aug 15, 2014 - 08:35 PM
About a dozen messages ago, Lee askd you if the a/d reading was Nice and Smooth 0x000 to 0x7ff with a pot or something besides the current sensor. If it is,...
Posted by jgmdesign on Sat. Jan 3, 2015 - 04:12 PM
John_A_Brown wrote: Of course they pay off. Take an extreme case. You're only at home on Christmas day. Do you leave the heating at 21 C all the year round, or...